Kingston Memory KF552C36BBEAK2-16 16GB 5200MT/s DDR5 CL36 DIMM Kit of 2 FURY Beast RGB EXPO

Kingston FURY KF552C36BBEAK2-16 is a kit of two 1G x 64-bit (8GB) DDR5-5200 CL36 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 1G x 16-bit FBGA components per module. Each module kit supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 16GB. Each module has been tested to run at DDR5-5200 at a low latency timing of 36-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.


• Power Supply: VDD = 1.1V Typical

• VDDQ = 1.1V Typical

• VPP = 1.8V Typical

• VDDSPD = 1.8V to 2.0V

• On-Die ECC

• Height 1.66” (42.23mm), w/heatsink CL(IDD)
40 cycles
Row Cycle Time (tRCmin)
48ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
295ns(min.)
Row Active time (tRASmin)
32ns(min.)
UL Rating
94 V - 0
Operating Temperature
0^oC to +85^oC
Storage Temperature
-55^oC to +100^oC
FACTORY TIMING PARAMETERS
Default (JEDEC):
DDR5-4800 CL40-39-39 at 1.1V
EXPO Profile Number 0:
DDR5-5200 CL36-40-40 at 1.25V
EXPO Profile Number 1:
DDR5-4800 CL38-38-38 at 1.1V
XMP Profile Number 1:
DDR5-5200 CL36-40-40 at 1.25V
XMP Profile Number 2:
DDR5-4800 CL38-38-38 at 1.1V
Item Dimension (L inchxW inchxH inch)
1 x 5 x 7

Weight
1 lb

Warranty Information
Lifetime